CUMMINS 12V EXHAUST MANIFOLD 6BT

Remove the heat shield mounting cap screws.
Remove the heat shield.
Chat Now

Product Details

CUMMINS 12V EXHAUST MANIFOLD 6BT

How to install or removal manifold

Description

Removal:

Remove the heat shield mounting cap screws.

Remove the heat shield.

Remove the insulation blanket mounting cap screws.

Remove the insulation blanket.

image001

Remove an upper capscrew and spacer from each end of the exhaust manifold and install guide studs, Part Number 3376488.

Remove the remaining capscrews, spacers, exhaust manifold , and gaskets.

Discard the gaskets.

image003


Installation:

Apply a film of high temperature anti-seize compound to new exhaust manifold capscrews.

Align the manifold and gaskets using guide studs.

Install spacers and new capscrews hand tight.

Remove guide studs and install remaining spacers and capscrews hand tight.

Tighten the capscrews in the sequence shown.


Torque Value:

  1. 27 n•m [ 239 in-lb ]

  2. 47 Nm 35 ft-lb

  3. Loosen all capscrews.

image005

Tighten the capscrews in the sequence shown.


Torque Value:

1. 27 n•m [ 239 in-lb ]

2. 47 N•m 35 ft-lb

3. Loosen all capscrews

4. 27 n•m [ 239 in-lb ]

5. 47 N•m 35 ft-lb.

image007

Install the exhaust manifold insulation blanket.

Install the exhaust manifold heat shield.

Tighten the capscrews.


Torque Value: 47 n•m [ 35 ft-lb ]

image009

Inquiry

You Might Also Like